SC-1650 Sleeve Collator    

The Bronway SC-1650 CD/DVD Sleeve Collator is a unit designed to automate and simplify the production of CD/DVD sets. This machine accurately and efficiently collates CD/DVD sleeves into sets and sub-sets of up to 16 per set. The smaller version, the SC-850 , can assemble sets of up to 8 discs. Both are stand-alone, ergonomic units with minimal footprints. Compared with manual collation, the Bronway collators offer substantial labor cost savings together with real product integrity. A new feature of the SC-850 and the SC-1650 is the ability to link multiple systems together to generate even larger CD/DVD sets. For example : two SC-1650 linked together can collate up to 32 CD/DVD sets when operated in linked mode, the systems can also be operated seperately with all the features of a standard system.

• High Speed Operation
  A set of 16 CD/DVD sleeves is assembled in approximately 6 seconds, which equates to 10 sets/min. Total throughput of up to 9,600 CD sleeves per hour.
• Input Conveyors
  Up to 16 CD/DVD sleeves per set can be configured through a simple menu selection. The smaller SC-850 has a 8 disc capacity.
• Front Loading
  Input conveyors can be front-loaded with up to 150 CD/DVD sleeves per conveyor
• System Set-up
  The system can be set up via the keypad/display on the fron panel though a simple menu selection or through your existing production network (optional).
• Continuous Operation
  The conveyors may bereloaded while the unit is operational.
• Conveyor Empty Alarm
  If any conveyor empties before the pre-programmed production quantity has been completed, an audible/visible signal reminds the operator to reload.
• Full Product Integrity
  Product set count and validation. Optional bar code reader for verification of individual CD/DVD sleeve/set.
• Ease of Operation
  Allows set-up and operation by non-technical personnel via the keypad/display on the front panel.
• Output/Packaging Options
  Finished CD/DVD sleeve sets are delivered in either of two ways: via a flighted output conveyor (shown above) for manual treatment by an operator; or via an actuating finger-push mechanism to interface automatically with packaging equipment.

• Increased throughput with the ability to ramp up on demand. Up to 600 sets can be processed per hour.
• Substantially reduced labor costs.
• Rapid payback on investment.
• Higher integrity in the finished product.
• Ergonomic design; small footprint, easily integrated.
• Choice of output delivery mechanisms to enable either manual or automatic finishing/packaging.
• Greater level of automation for improved product flow after sleeving (reduces W.I.P. and eliminates bottlenecks).
• Reduced manual handling of CD/DVD sleeves (cosmetic improvement).

• CD Sleeve Types

Card, Paper, Polypropylene, Tyvek, and Safety Sleeve.

• Capacity

2,400 CD/DVD sleeves can be held in the 16 input conveyors

• Weight

SC-1650: Approximately 250kg

• Dimensions

SC-1650: 3300mm x 1325mm x 1300mm

• Energy Requirements

110/220 VAC 50/60 Hz
Single phase 5A
10-100psi with less than 1 CFM

Bronway Ltd.
Bray Business Park,
Southern Cross Route,
Bray,
Co. Wicklow,
Ireland.

Phone: +(353)-1-2-800 200
Fax: +(353)-1-2-845 835
email:info@bronway.com

Bronway USA
20 Spruce Lane,

Gorham, 

ME 04038

Phone: +1-207 838-0809

Fax:     +1-207 839-8405

email:info@bronway.com